We manufacture
lockers and cubicles in a wide range of colours primarily from the
Trespa Athlon range. Stock colours are shown below. Please be aware
that due to limitations of colour reproduction you should confirm
the exact colour you require before ordering. A wider range of colours
is available from a non-stock range of Trespa Athlon colours and
also from the Polyrey range - please contact us to discuss availability
if you require a wider range of colours.
Colours can
be combined, for example for contrasting cubicle door colours, or
to create a chequerboard or striped effect across locker doors,
such as this recent installation featuring speckled white with speckled
silver grey:
Our bench seating,
island units and clothes hooks are manufactured using epoxy powder
coated steel in a range of colours (see below - click HERE).
Any other bespoke colours are available subject to minimum colour
order quantities.
Our mild steel
lockers in stove baked enamel are available in a wide combination
of carcass and door colours (see below - click HERE)
UK
stock colour Trespa range
Woodgrains Please
note that a small surcharge will apply if you select a "directional
pattern" such as a woodgrain due to the increased wastage arising
from ensuring the pattern or grain is always in the same direction.
Beech
W73-01
Silver Maple
W71-03
Wild Cherry
W78-01
Lime
W80-01
European Wild Apple
W88-02
Verona
Walnut
W82-03
Plain and speckled We
highly recommend the use of speckled colours. They do not show dirt
/ water staining or streaking as much as a plain colour and therefore
require less ferquent cleaning and are often more appealing to the
eye than a long bank of solid coloured lockers.
Powder Blue
E17-32
Heaven Blue
E17-30
Light Blue
E19-11
Icey Blue
E25-01
Speckled Powder Blue
S17-32
Speckled Heaven Blue
S17-30
Speckled Light Blue
S19-11
Speckled Icey Blue
S25-01
White
E0-00
Sand
E3-01
Aquamarine
E20-12
Pastel Green
E23-21
Speckled White
S0-00
Speckled Sand
S3-01
Speckled Aquamarine
S20-12
Speckled Pastel
Green
S23-21
Silver Grey
E0-02
Speckled Silver Grey
S0-02
Plain and patterned Please
note that a small surcharge will apply if you select a "directional
pattern" such as the "MC" coded patterns shown below
due to the increased wastage arising from ensuring the pattern or
grain is always in the same direction. "C" coded patterns
are not directional.
Aqua Blue
E17-52
Poppy Red
E7-62
Gold Yellow
E3-42
Melon Yellow
E2-31
Soft Pink
E5-11
Steel Blue
E25-04
Pastel Grey
E0-015
Cyber Blue
CB-3
Black Craquele
C0-09
Micro Grey
MC-1
Micro Black
MC-2
Vanity
tops We
can supply post formed Trespa vanity tops in all the above colours.
However, only the following colours are available as standard. Any
colours other than those shown below will result in potentially
increased lead times and additional charges.
E0-00
White
E0-02
Silver Grey
E3-01
Sand
E17-32
Powder Blue
E20-12
Aquamarine
S0-00
Speckled White
S0-02
Speckled
Silver Grey
S3-01
Speckled Sand
S17-32
Speckled Powder Blue
S20-12
Speckled Aquamarine
Stock Epoxy Powder Coating Colours
Please note
that the colours below are computer reproductions of the relevant
RAL or BS4800 colours. The actual colours may therefore vary from
these colours but they are indicative of the product colours -
in particular, the blue, green and yellow painted products appear
brighter and lighter than the colours reproduced below:
The
colours shown below are our standard colours for all epoxy powder
coated steel products that we manufacture including bench seating
and island units bracketry. We can obtain powder in many other
RAL colours, however there will be an additional charge for a
non-standard colour as we must purchase a minimum quantity of
each colour powder.
Blue
(Middle Sky Blue)
RAL: 5015
Green
(Traffic Green)
RAL: 6024
White
(Traffic White)
RAL: 9016
Black
(Jet Black)
RAL: 9005
Red
(Traffic Red)
RAL: 3020
Yellow
(Golden Yellow)
BS4800: 08E51
Grey
(Goose Grey)
BS4800: 00A05
Mild steel locker colours
Our
mild steel lockers are stove enamelled in a range of attractive
colours with a wide choice of colour combinations to suit your
facility. Please note that we do not recommend steel lockers in
wet changing areas.