 |
 |
 |
Bench
seating and island units...
Continental manufactures a range of bench seating, island
units and clothes hooks for changing rooms. As a manufacturer,
we can work with you to manufacture our products to
your requirements - you are not limited to "standard"
sizes as we can make lengths to suit your changing area.
Steelwork is 60mm x 30mm tubing, epoxy coated in red,
yellow, blue, black, white or dove grey, with special
colours available if required. The tubing can be galvanised
before powder coating if required. To see samples of
stock epoxy powder coating colours see the colour chart
here.
The hardwood timberwork is white beech. Bench slats
and wall battens are 85mm x 25mm nominal with bullnose
edges, sealed, lacquered and polished. Additional strengthening
brackets are supplied.
Where floor fixed items are required the fixing points
are concealed to ensure the installation is tamper /
vandal resistant.
Special height units are available for juniors and infants.
The units can be supplied in component form for on-site
assembly, but a nationwide fitting service is available
if preffered.
Please
refer to the Specifiers section of the website for technical
documentation.
|
|
|
| |
|
 |
 |
 |
 |
| |
 |
Double
sided island units
With
hooks, bench seat, back rest and shoe tray or
footbar.
- Height:
1670mm
- Depth:
725mm
-
Length: manufactured in lengths to suit your
requirements (in whole multiples of 300mm*)
- Hooks:
at 300mm centres as standard (hooks at 150mm
centres available at additional cost)
| Ref:
2010 Price
per linear metre with footbar |
|
£247 |
| Ref:
2020 Price
per linear metre with shoe tray |
|
£255 |
Prices shown above are per metre for budgeting
purposes only, based on installation by
Continental engineers. Please contact us
for a definitive quotation.
*
Each unit is manufactured in 300mm multiples
and has an additional 50mm overhang at either
end.
Carriage
is charged at£18.50 on all orders
below £400. Prices exclude VAT and
are valid until 31 March 2009. All orders
are accepted subject to our Terms
& Conditions of Sale which are available
here.
Please email
or telephone +44 1484 542051 for more details
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
|
| |
|
|
|
| |
|
Single
sided island units
With
hooks, bench seat, back rest and shoe tray or
footbar.
- Height:
1670mm
-
Depth: 380mm
- Length:
manufactured in lengths to suit your requirements
(in whole multiples of 300mm*)
- Hooks:
at 300mm centres as standard (hooks at 150mm
centres available at additional cost)
| Ref:
2030 Price
per linear metre with footbar |
|
£181 |
| Ref:
2040 Price
per linear metre with shoe tray |
|
£185 |
Prices
shown above are per metre for budgeting
purposes only, based on installation by
Continental engineers. Please contact us
for a definitive quotation.
*
Each unit is manufactured in 300mm multiples
and has an additional 50mm overhang at either
end.
Carriage
is charged at£18.50 on all orders
below £400. Prices exclude VAT and
are valid until 31 March 2009. All orders
are accepted subject to our Terms
& Conditions of Sale which are available
here.
Please email
or telephone +44 1484 542051 for more details
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
|
Single
width bench seat
With
shoe tray or footbar.
- Height:
457mm
-
Depth: 345mm
- Length:
manufactured in lengths to suit your requirements
(in whole multiples of 300mm*).
| Ref:
0010 Price
per linear metre with footbar |
|
£116 |
| Ref:
0020 Price
per linear metre with shoe tray |
|
£119 |
Prices
shown above are per metre for budgeting
purposes only, based on installation by
Continental engineers. Please contact us
for a definitive quotation.
*
Each unit is manufactured in 300mm multiples
and has an additional 50mm overhang at either
end.
Carriage
is charged at£18.50 on all orders
below £400. Prices exclude VAT and
are valid until 31 March 2009. All orders
are accepted subject to our Terms
& Conditions of Sale which are available
here.
Please email
or telephone +44 1484 542051 for more details
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| |
|
| |
|
| |
|
|
|
| |
|
Wall
battens with hooks
Available
in either timber with epoxy powder coated steel
hooks screwed into a white beech batten which
is bolted to the wall, or epoxy powder coated
steel hooks pop rivetted to steel tubing batten.
The
screws used to attach the hooks to the timber
battens are tamper-resistant and the hooks cover
up the fixings of the batten to the wall.
Manufactured
in lengths to suit your requirements.
Hooks
are located at 300mm centres as standard but are
available at additional cost at150mm centres.
Please specify if you would prefer hooks at 150mm
centres.
| |
|
|
| Ref:
5010 -
Timber |
|
£44 |
| Ref:
6010 -
Steel |
|
£35 |
Prices
shown above are per metre for budgeting purposes
only, based on installation by Continental
engineers. Please contact us for a definitive
quotation.
Carriage
is charged at£18.50 on all orders below
£400. Prices exclude VAT and are valid
until 31 March 2009. All orders are accepted
subject to our Terms
& Conditions of Sale which are available
here.
Please email
or telephone +44 1484 542051 for more details
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
