Pitch
divider system
Ref:OEPD01
- Pitch divider system set
We
offer a standard set which is perfect for the
vast majority of pitches, but the set can be tailored
if it isn't exactly what you require.
Our
standard set is designed to cover a typical 68m
span - this allows a standard football pitch (allowing
for run-off and recessed storage area for the
posts) to be divided across its width. Typically
a football pitch would require two or three of
these standard 68m dividers to divide it into
three or four sections for use as three or four
five-a-side pitches.
Each
set comprises:
- One
3m high winch post fitted with a high specification
brake type winch with a 100kg maximum load.
- One
detachable tensioning handle
- One
3m high dummy post
- 75m
of 2.0mm thick 50mm square mesh black polypropylene
net
- 72m
of 4mm dia. straining wire
- 144
no. 50mm stainless steel split rings
- 75m
of 20mm polyethylene rope sewn in to a vinyl
band at the bottom of the mesh to prevent billowing.
- One
net storage pouch.
Posts
manufactured from 100mm square section steel,
galvanised and powder coated green (not blue as
per the image).
Please
note: the above system is supply
only and the posts must be concreted into 1000mm
x 1000mm x 1000mm blocks of concrete
| OEPD01
- One 68m pitchdivider system |
|
£POA |
Carriage is charged at£18.50 on all orders below £400. Prices exclude VAT and are valid until 31 March 2009. All orders
are accepted subject to our Terms
& Conditions of Sale which are available
here.
Please email
or telephone +44 1484 542051 for more details
|
|
