Fixed timber PE equipment...
Manufactured from top quality pine, sealed, polished and with steel fittings. Continental manufactures a range of traditional timber PE equipment that has been tried and tested in thousands of schools, colleges and other institutions throughout the UK.

   
 

Timber "Foldaway"

Manufactured from top quality pine, sealed, polished and with steel fittings, the Foldaway provides the opportunity required by the National Curriculum for a variety of activities - hanging, balancing, turning upside-down etc.

The 3 gate frame, which can be fixed in a "Y" or "T" position, comes complete with 2 stabilising ladders. The frames are 2.4m high (please call to discuss if you require higher frames). The frames folds flat against the wall requiring only 2.3m of wall space, and no special door access is required.

Over 20 gate designs are available, with four of the most popular illustrated to the right and links to pdf documents showing the complete range below right.


The illustration above to the right shows Pattern U Rings as the maingate with Pattern U Knotted rope and Pattern S as the other two gates.


The frame has a single wall pivot which can be arranged to span windows and radiators if necessary. Strong shoot bolts secure the frame and no overhead cable is necessary. As the fixings require our installation engineers to drill into the floor, provision must be made in advance if underfloor heating is installed.

The diagram to the right show four of the most popular gates from the full range of more than 20 gate designs.

For fixing information and details regarding the provision required if underfloor heating is to be installed, please refer to the specifiers' section of our website here.

Click HERE to see the operation and maintenance manual for the timber foldaway.

Price   £POA


Please email
or telephone +44 1484 542051 for more details
 


 

 

Above are links to two documents showing the 20 available frames

 
   
 
 
 

Cantilevered beam units
(traditionally known as "Single/double beams")

Manufactured to BS1892 / 1972. Either wall hinged or roof fixed depending on site requirements. Heights are:

Keystage 3 - 3.0m (10') & 3.6m (12')
Keystage 4 - 4.2m (14') & 4.8m (16')

These items require floor fixings and the requirements regarding underfloor heating therefore apply to these items - please refer to the specifier's section of the website here.

Click HERE to see the operation and maintenance manual for wall hinged timber frames.

Price £POA

Please email or telephone +44 1484 542051 for more details 


 

Cantilevered (single/double) beams from Continental Sports

Cantilevered (single/double) beams from Continental Sports

The above item requires a wall fixed tension clamp which is installed as standard on a timber patress. A padded tension clamp cover is available at additional cost - please click here for details

 

 
 
 
 

Wall hinged timber climbing frames

A top quality wall hinged climbing frame manufactured to BS1892 / 1972.

A versatile and space saving frame with 20 gate options. These frames can be supplied as a single gate or in multiples which can be linked with 3m beams and ladders. Typically provided in singles, pairs or triples which operate simultaneously, please contact us to discuss your requirements.

The illustration to the top right shows a pair of frames - gates B & R - designed to operate simultaneously as a pair, complete with ref. 395 bridging ladder and ref. 398 balance beam.

Each gate stores flat against the wall requiring only 3m of wall space. If space is at a premium, two gates can be arranged to fold onto each other, still requiring only 3m of wall space in total. Windows and radiators can be spanned without difficulty.

The illustration to the middle right shows two frames - D and R - and a cantilevered beam unit installed to operate as a triple frame group.

The frame is secured by an overhead cable, tension clamp locking device and shoot bolts into the floor.

Frames are available with your choice of either oval timber rails, or with epoxy powder coated 32mm diameter steel tube horizontal rails.

Click HERE to see the operation and maintenance manual for wall hinged timber frames.

These items require floor fixings and the requirements regarding underfloor heating therefore apply to these items - please refer to the specifier's section of the website here.

Price £POA

Please email or telephone +44 1484 542051 for more details 


 

Timber climbing frames (or window ladder frames) from Continental Sports

Timber climbing frames (or window ladder frames) from Continental Sports

 

Above are links to two documents showing the 20 available frames

 

 

The above items require a wall fixed tension clamp which is installed as standard on a timber patress. A padded tension clamp cover is available at additional cost - please click here for details

 

 

 
   
 
 
 

Wall bars

Traditional timber wall bars manufactured to BS1892 / 1972. Supplied in single or multiple bay units, 2.7m high with 18 horizontal rails in either standard or "hygienic" arrangement - i.e. lifted off the floor.

Usually installed by Continental installation engineers, but can be supplied on a supply only basis with installation instructions.

These items require floor fixings (unless using hygienic type) and the requirements regarding underfloor heating therefore apply to these items - please refer to the specifier's section of the website here.

Price £POA

Please email or telephone +44 1484 542051 for more details 


 

Timber wall bars from Continental Sports

Timber wall bars from Continental Sports

 

 
 
 
 

Tension clamp padded cover

Available for all wall hinged equipment that requires an overhead tensioning cable, this padded safety cover for the wall mounted tension clamp provides additional protection for users of the apparatus and undertaking other activities in the gymnasium both when the equipment is being used, and when the equipment is stored against the wall.

Tension clamp covers can be installed at the same time as the hinged frame, or they can be retro-fitted at a later date. Covers supplied at a later date are straightforward for self-install, or can be installed by Continental engineers.

Price
(if fitted with a hinged frame, or on a supply only basis)
  £80
Price
(if retro-fitted by Continental engineers)
£POA


Carriage is charged at£18.50 on all orders below £400. Prices exclude VAT and are valid until 31 March 2009. All orders are accepted subject to our Terms & Conditions of Sale which are available here.

Please email or telephone +44 1484 542051 for more details 


 

The padded tension clamp cover replaces the standard timber patress onto which the galvanised steel clamp is fixed. The padded cover hinges to expose the clamp and is held in place by a velcro edge.

 

 
 
 
 

Additional linking and bridging equipment for use with wall hinged timber climbing frames

Ref:408 - 7' (2.1m) steel padded plank with hooks at both ends.

Ref:395 - 7' (2.1m) bridging ladder with hooks at both ends. Available in steel or aluminium,

Ref:396 - 7' (2.1m) single pole with hooks at both ends. Available in steel or aluminium.

Ref:397 - 7' (2.1m) double pole with hooks at both ends. Available in steel or aluminium.

Continental also manufactures storage hooks and brackets for these items. Please refer to the storage equipment section of the website in Sports Hall equipment.

   
Ref:408 - 7' steel padded plank   £113
Ref:395/1- 7' steel bridging ladder   £67
Ref:395/2 - 7' aluminium bridging ladder   £177
Ref:396/1 - 7' steel single pole   £48
Ref:396/2 - 7' aluminium single pole   £83
Ref:397/1 - 7' steel double pole   £67
Ref:397/2 - 7' aluminium double pole £146

 

Carriage is charged at£18.50 on all orders below £400. Prices exclude VAT and are valid until 31 March 2009. All orders are accepted subject to our Terms & Conditions of Sale which are available here.

Please email or telephone +44 1484 542051 for more details
 


 

 

The above image shows the 2.1m (7') padded plank, Ref: 408

 

The above image shows the 2.1m (7') steel bridging ladder, Ref: 395

 

The above image shows the 2.1m (7') epoxy powder coated steel pole, Ref: 396 and the 2.1m (7') steel double pole, Ref: 397